Cell# 949-945-5417 or 207-319-7414
334 Lowell Town Road | Wiscasset, Maine
HHO Generator & Components Catalog
Plans currently sell for $47
Get started converting your car or truck with our least expensive but most durable HHO generator, The Vanguard!
NEW Magma HHO Generator
BEST DEAL -
COMPLETE HHO SYSTEM - $499 + 20 s&h
Works on up to 6 liter engines
Stanley Meyer 8 cell Water Fuel Cell (exciter array)
8 Cell Unit Kit
Please allow at least three weeks for completion plus five days for shipping time. We cannot ship overseas as this unit is too heavy for economical shipping outside the USA
11 Plate HHO Dry Cell Generator…Complete Kit with parts ready to install
1 liter per minute
21 Plate HHO Dry Cell Generator CompleteWith Installation Kit
Output: Approx 2- to 3 liters per minute
Advantages Of The HHO Dry Cell
HHO Dry Cell vs Wet Cell
So, what's all the controversy about? Why is the HHO Dry Cell a better design?
Here are 2 main reasons:
1. When the edges of the plates of a hho generator are submerged in the water/catalyst bath a great deal of the electrical current passes through the edges of the plates. This current is largely wasted in terms of HHO production. When the edges are outside of the bath, as with the hho dry cell, all of the current is forced to travel directly to the faces of the plates. Therefore all of the current supplied to the hho generator is utilized in efficiently making HHO gas.
This is the main reason the hho dry cell design has become so popular.
2. The electrolyte bath attacks and will eventually destroy the electrical connections if they are submerged. With the hho dry cell design they are outside of the water/catalyst solution which is stored in a separate reservoir and recirculated by the hho dry cell, this help in producing more hho gas and less heat (steam)
The plates of our HHO dry cells are made of 316L stainless steel. This has been found to have the best properties of resistance to attack from the process of electrolysis. However, mounting hardware and wire and cable are very difficult to find in 316L grade and are very costly to use.
Therefore copper cable is usually used by Hydrogen on Demand installers when installing their hho generators. And a lower grade of stainless steel nuts and bolts are used by hho generator builders for assembly and when these are submerged in the electrolyte, they rapidly get eaten away.
With the HHO dry cell design, all of these connections are outside of the electrolyte so this isn't an issue.
Why is it that a hho dry cell design produces more hho gas?
Because it is efficient, there is not a lot of wasted spaced and electrolyte solution that is not being used and charged with current. The very small volume of electrolyte solution that enters the hho dry cell is subjected to electrical current and able to react and create hho, then exit the hho dry cell generator and recirculate.
Why do hho dry cells run cooler than other hho generators?
Again, because of the design of the hho drycell, with the "wet cell" generators the heat created by the electrolysis process has no place to go. With the Dry Cell Design the electrolyte solution is gravity fed in order to keep it replenished. A constant flow keeps the unit from overheating.
This Dry Cell is one of the most effective on the market today.
The most used hho dry cell in Europe and USA
The HHO Dry Cell design shown below has about 80-90% total efficiency when all things are considered (ambient temperature, ambient pressure, accurate measurement of gas volume and current) when powered by straight DC. Pulsing or modulation of the input voltage waveform to this hho dry cell could increase the performance further, as it is known that in the beginning of each pulse larger current flows than in the steady state condition, thus lowering the cell voltage needed to push threw a certain amount of current and increasing the efficiency of a Hydrogen Generator slightly.
Thousands of satisfied customers stand behind these hho dry cells.
Why is the 11 plate hho dry cell the "best" hho dry cell design ?
I do not claim to know everything there is to know about Electrolysis, but the lowest "theoretical" voltage for electrolysis is understood to be 1.24 volts and if you don't go over 1.48 volts the electrolysis chamber (cell) will remain cool - similar to the environment you have it in, if you do go over 1.48 v you are producing heat.
So there comes a point at which you must trade some of your energy to produce heat in order to get the desired hho gas output.
The 11 plate hho dry cell has a total of 10 separate cell chambers, divide by an additional Positive plate the arrangement of the plates and the hole configuration is what has proven to be the dry cell design that produces the most hho gas with the least amperage draw
Conclusion : For the Novice Mechanic wanting to experience the benefits of of adding hho gas to their vehicle by installing an hho generator this design is the way to go. To Install Hydrogen on Demand On The Average Car or Truck This is the Best HHO Generator to start with.
This HHO Dry Cell Design Produces clean hho gas at low amp draw, you chose the hho dry cell, or cells that best suit your engine size. Extensive testing has been ongoing for years as to how much hho gas is needed for optimal results on the average motor vehicle. According to NASA and other test, including ours and other hho installers 5% of the fuel mix is all you need. This works out to be Apx. 1/4 to 1/2 LPM ( liter per minute ) of hho gas per Liter of motor size.
I will publish a more detailed article on this subject and add a link for those who want to do more research.
European countries are catching on to the awesome effects hho generators and Hydrogen on demand systems can have on there autos and trucks. We are proud to say our hho drycell is producing awesome results in Greece, Netherlands, Italy, France, and all over Europe as well as all over Australia.
Here is just one awesome test result in Greece with our hho dry cell generator design
European hho dry cell results :
Install - our 11 plate dry cell system on a 1600cc auto using petrol resulted in 52% increase in gas mileage and near 90% lower emissions.
These "HHO Generators", will produce Hydrogen and Oxygen gas commonly known as Brown's gas, hydroxy gas or HHO.
Hydrogen is a volatile colorless gas that has a low temperature ignition point. This gas also has no smell. Serious injuries and bodily harm can occur if the device is not handled or used properly! Powergate Technologies accepts no responsibility for your health or safety when working with hydrogen gas or any of our products. You are 100% responsibility to follow all safety precautions. Since we are not attorneys we recommend you research out correct safety and handling procedures before using any of our equipment.
Please, Safety First when dealing with any hydrogen generators!
11 cell hho dry cell - Tested hho dry cell kit 11 cell hho dry cell - Diy hho dry cell kit 11 cell hho dry cell - Complete hho dry cell kit - install
You Will No Doubt Run Across other hho generator sites selling The Same Type of HHO Dry Cell and HHO Dry Cell Kits. This 4x4 hho generator is the most copied out there. As everyone is searching for a compact hho generator that will produce the right amount of hho gas needed at low amp draw.
Our staff have purchased and constructed many water gas generators. We've researched what makes the Stanley Meyer hydrogen generator superior over common hydrogen generators that use the electrolytic process to make Brown's gas.
We believe this HHO Dry Cell Design is the best hho generator available at these prices.
You can be overwhelmed by the different hho generator designs, sizes and shapes once you start studying this awesome yet simple hydrogen on demand technology.
* Our Excellent Customer Service. Calls are welcome! Call cell:949-945-5417. Office: 207-319-7414
You do not have to buy anything from us to get help on your hho generator projects.
Stanley Meyer / Dave Lawton Style Variable Frequency Pulse Width Modulator
standard 10 amp unit @ $349
This is a true Stanley Meyers / Dave Lawton Circuit Design!
47 at http://www.Hyfusion.com . I'll include a copy free with your order!
The Volo Chip………it has a on the fly sensor package that senses for the Oxygen levels every few seconds so the computer does not dump unneeded gas or diesel. Easy to install on the back side of your OB2 Port. Works great when all the sensors are correct. I have seen people get 10 miles a gallon more and some people get nothing. About 50% happy customers with this chip. I’m a dealer and load them at my house from my computer $89.00 each plus shipping
This is the DIGITAL EFFIE, THIS WORKS GREAT but it only addresses the O2 sensors and the MAP/MAF sensors so you will get around a 30% TO 40% improvement on your MPG. Skill Level is fair. The Effie uses digital signals to talk to the computer so it works a little better than most. Comes with an 8 page manual. $109.99 EACH
This is a 50 amp in dash meter with a 50 amp shunt. What you see is a complete kit for $16.00 plus shipping.
New Tuning 101 AFR Control Center
Automated Tstat Control For Narrow Band Oxygen Sensors Only.
The 101 tuning control center is purchased from D &N Engineering and we are a dealer for them and here is what they say about their products…..Dave
New Tstat Activation that automatically activates your unit @ 160 F. No more waiting 5 minutes every time you start your vehicle. Your AFR Control Center Will automatically turn on as long as your coolant temperature remains @ 148 F. or Higher. New 1 wire hookups for your IAT & CTS we have made installation much easier and simpler. New 20 turn IAT, potentiometer this will allow you to adjust your timing as little as 1/4 degree at a time New expanded range MAF/MAP enhancer New now available for all of the Chrysler/Dodge/Jeep With the 2.5 volt bias 02 sensors. Now You Too Can Tune Like the Pro's Using the Tuning 101 Techniques included with your order
It Lets YOU Take Control of your AFR ( air fuel ratio ) For Those HUGE Mileage Gains That Puts you in Charge of your ECU . Mileage Gains of 50% to 100%+ are Common One of our Test Vehicles was able to Achieve a Mileage Gain Of 139% .This is NOT Typical. Some of this is due to my 55+ Years Experience In the Automotive Service and Repair Industry. The reports are coming in Fast and Furious We Now have 39 Members of The "Elite 100 Club" This club is made up of customers who have achieved a 100% or more Mileage Gain with The Tuning 101 AFR Control Center. This Device is NOT for the beginner. A certain amount of skill level is required. If you have been
experimenting with HHO and have basic automotive knowledge, Patience, and the ability to follow Directions. Manual is 19 pages.
New Tuning 101 AFR Control Center Automated Tstat Control
Be careful when you order!!!
If your car is made overseas it might be using Wide band sensors. Japanese or Germany. You will need the wide band version. (ask your car dealer or service garage if you don’t know)
If you have drive a Dodge or Chrysler vehicle then you need the Dodge version.
All others from U.S. and Canada have narrow band.
101 AFR Control centers
Narrow band (US/CAN)$ 219.00 Add to Cart
Wide Band (FOREIGN) $219.00 Add to Cart
Dodge Chrysler version $229.00 Add to Cart
To order visit the websitehttp://www.Powergate.us/HHOParts/
Or call cell phone: 949-545-1195or Office: 207-319-7414
Or send cashier’s check or money order (domestic banks only) to:Powergate Technologies 334 Lowell Town Road Wiscasset, Maine 04578
Technologies disclaims any warranties (express or implied),
merchantability, or fitness for any particular purpose. Experimenting
with Hydrogen is extremely hazardous. Customer agrees by purchasing any
products from this site that customer is solely responsible for his own
safety. The company shall in no event be held liable to any party for
any direct, indirect, punitive, special, incidental or other
consequential damages arising directly or indirectly from any use of
components, which are provided “as is”, and without warranties as to
fitness for any purpose.
As always, the advice of a competent legal, engineering, accounting or other professional should be sought. The author and company, Powergate Technologies, does not warrant the performance, effectiveness or applicability of any mechanical system built with components sold on this web site. All links are for information purposes only and are not warranted for content, accuracy or any other implied or explicit purpose.